Week 4 · Guide 2 of 5

Automation & Agents

Keep Your Workflow Card and Skill in Step

Field Guide

  • 20–30 minGuided walkthrough

Once your Reusable Workflow Card becomes a skill, your workflow lives in two places: the card in My Agent Files and the skill your agent follows. Give the card a version number, then make the skill again from each new version, so both copies always say the same thing.

You’ll leave with

A numbered Workflow Card with its own version history, and a skill made from that version, which your agent can name in a new chat.

What You Need for This Guide

  • Your newest Reusable Workflow Card file from Session 4, saved in My Agent Files.
  • The skill or skill file you made from it in this week's Agent Workshop. If you haven't made one yet, you can number your card here first.
  • Your approved AI tool.

Choose the tool you’re allowed to use

Your approved tool

The tool your company approved.

Pick your approved tool above to see the steps and screenshots for it.

Start guide
5 steps · At your own pace
About saved progress

No account needed. Checkmarks save on this browser and device when browser storage is available. If storage is blocked or full, new checkmarks last until you reload or close this page. Progress doesn’t sync to other browsers or devices. Clearing this site’s browser data removes it, and private browsing may not keep it after you close the window.

Step

Check whether your card and skill still match

Your card is the master copy, and your skill is a copy. Before you number the card, check that nothing worth keeping lives only in the skill, such as a step you changed there. If you haven't made a skill yet, go to step 2.

  1. Start a new chat and attach your newest card file. If your skill is in your tool's skills, pick it in the chat: type @ in ChatGPT, or / in Claude and in Gemini for Google Workspace, where it may be @. If it's a skill file, as in Microsoft 365 Copilot Chat or Gemini without Skills, attach that too, in a regular chat outside your notebook. Send this prompt with your skill's name in the brackets.

    Compare my skill with my Workflow Card
    Compare my [your skill's name] skill with my Reusable Workflow Card, attached.
    
    Read the skill itself: the one in my skills, or the skill file attached to this chat. Go through both, part by part, and list every difference in a table: Part, In my card, In my skill. Leave out the skill's name and description, which only the skill has. If they match, say so.
    
    Don't decide which one is right, don't run the workflow, and don't change anything.
  2. For each difference in the table, decide which copy is right. Write down anything from the skill you want to keep, for step 2. Anything else can go, because step 3 replaces the skill. If your agent can't read the skill, write down any change you remember making there instead.

Step

Number your card

Now number the card, the same way you numbered your Safety & Security Rules if you did. Its title, the version line under it and its filename will all show the same number, and a WORKFLOW VERSIONS section at the end keeps a short history of changes.

  1. Start a new chat, attach your newest card file and send this prompt. In its bracketed line, put anything you kept from your skill in step 1, or None, set up versioning only.

    Set up versioning for your Workflow Card
    I want to set up versioning for my Reusable Workflow Card, attached, so I can track every change.
    
    Change to make: [type each change on its own line, such as something you kept from your skill, or write "None, set up versioning only"]
    
    Put any change in my card, not your built-in memory, so my file stays my master copy. Unless something conflicts, do all of this in one reply:
    
    1. If I gave changes, put each one in the part of the card it fits best, such as Steps, Standard or Output. Use my words, and don't add steps or rules I didn't give you. If a change would weaken or contradict something already in the card, stop before writing anything: quote both and ask me which one to keep.
    2. If my card has no WORKFLOW VERSIONS section, add the one below to the end of the card, word for word. If the card has no version number in its title, version line or filename, treat the current card as Version 1, so the card you return is Version 2. Otherwise continue from its current number, and change the first VERSION HISTORY line to that number, like Version 2: Earlier card. Do not restart numbering. If my filename already starts Workflow-Card, keep its words and change only the number.
    3. Follow WORKFLOW VERSIONS to return the entire updated card, with the new version number in its title, its version line and its filename. Keep every other part of the card word for word, including Rule Priority and How I Want My AI Agent to Use This Workflow.
    4. In the What changed table, list my changes, if I gave any, and say whether you added WORKFLOW VERSIONS. Do not claim a section was added if it was already there.
    5. End by walking me through saving it, as WORKFLOW VERSIONS describes.
    
    WORKFLOW VERSIONS
    
    The card title, the version line under it, and the filename all show the same version number. Use simple whole numbers: v1, v2, v3, and so on. The title is my workflow's name followed by Workflow Card and the number, with readable spaces, like Weekly Status Update Workflow Card v2. The filename starts Workflow-Card, then the workflow's name in a few words joined by hyphens, then the number, like Workflow-Card-Weekly-Status-Update-v2.txt. Keep the same name in every version.
    
    - This card is my master copy. A skill or skill file made from it is a copy, not my card: it starts with name and description lines. Make every new version only from my complete card file, never from a skill, a skill file or an earlier chat. If the only copy you can see is a skill or skill file, ask me to attach my card file first.
    - If I ask which version you're using, give that line's number and date.
    - If I ask you to update this card, create the next version:
      1. Raise the current version number by one. Use that new number in the title and in the version line below it, like Version 2 | Updated October 28, 2026. These are examples: use the actual next number and today's date. If you can't see today's date, write DATE NEEDED.
      2. Apart from the title, version line and version history, change only what I asked. Keep every other part of the card word for word, in the same order.
      3. Add a one-line summary to the top of VERSION HISTORY. Keep the five newest lines.
      4. Give me the entire updated card as one downloadable plain-text file named as above, like Workflow-Card-Weekly-Status-Update-vNUMBER.txt, replacing NUMBER with the new version number. Use only plain letters, digits, hyphens and the dot before txt. Include every section and all unchanged content. If you can't create files, put the entire card in one code block and give me the exact filename above it.
      5. Show what changed in a table: Section, What changed, Why.
      6. Walk me through saving it: save the new file in the same folder as my earlier versions, keeping every older file. Then remind me to make my skill again from this version and remove the old skill or skill file, start a new chat, and ask which version my skill is.
    - If a change would contradict something already in this card, quote both and ask me which one to keep before you write the new version.
    - If I tell you something new that belongs in this workflow, offer to make a new version from my card file. Wait for my yes.
    - Never overwrite an earlier version or reuse its number.
    - You can't change a skill made from this card, so don't say my skill is updated until I've made it again from the new version.
    
    VERSION HISTORY
    - Version 1: Original card.
  2. Check the file before you save it. Its title, version line and filename should show the same new number: v2 if your card had none, or one higher than its filename's. The What changed table should say WORKFLOW VERSIONS was added, and every other part of your card should be there word for word. If not, ask in the same chat for the complete corrected card.

  3. Save it under the filename in the reply, such as Workflow-Card-Weekly-Status-Update-v2.txt, beside your earlier card, and keep the earlier file as your record. Your newest card is always the file with the highest number. If you got text instead of a file, paste it into a new plain-text file with that name. If you also keep the card in your Project or Notebook, replace that copy with the new file.

Step

Make your skill again from the new version

Your skill still holds an older card, so make it again from the file you saved. If you haven't made a skill yet, make your first from this numbered card with this week's Agent Workshop, then come back for step 4. If your organization has switched Skills off, your card is your only copy, so there's nothing to keep in step: attach your newest card to a chat whenever you run it, and use the prompt in step 5 for each change. Your numbered card is your finish line.

  1. Start a new chat, in Copilot Chat a regular chat outside your notebook, attach the new card file and send the prompt for your tool, with your skill's name in the brackets. It copies your card word for word, so the title, version line and WORKFLOW VERSIONS come through into the skill.

    Make my skill again from my Workflow Card
    Make my skill again from the newest version of my Reusable Workflow Card, attached.
    
    - Name: [your skill's name, such as weekly-status-update]. Keep that exact name.
    - Description: one sentence of 200 characters or fewer that starts "Use when" and says when to use this skill, taken from my card's Trigger.
    - Instructions: my card's text word for word, from its title to its last line. Keep the title, the version line under it and the WORKFLOW VERSIONS section. Don't reword, reorder, shorten or add anything, including steps, examples, rules or scripts of your own.
    
    Before you build it, show me the name, the description and the first two lines of the instructions, and wait for my yes. Then build the skill so I can save it to my skills.
    Make my skill file again from my Workflow Card
    Make my skill file again from the newest version of my Reusable Workflow Card, attached.
    
    - Name: [your skill's name, such as weekly-status-update]. Keep that exact name.
    - Description: one sentence of 200 characters or fewer that starts "Use when" and says when to use this skill, taken from my card's Trigger.
    - Instructions: my card's text word for word, from its title to its last line. Keep the title, the version line under it and the WORKFLOW VERSIONS section. Don't reword, reorder, shorten or add anything, including steps, examples, rules or scripts of your own.
    
    Before you write it, show me the name, the description and the first two lines of the instructions, and wait for my yes. Then give me the whole skill as one plain-text file named with the name and -skill.txt at the end, such as weekly-status-update-skill.txt. Start the file with these four lines, filled in:
    ---
    name: the name
    description: the description
    ---
    Then the instructions. If you can't create files, put the entire file in one code block and give me the exact filename above it.

    Use the first prompt if Gemini shows Skills under Customize, and the second, in a regular chat outside your notebook, if it doesn't yet. If you made a skill file before Skills arrived, remove it from MyAgent's sources too.

  2. Before you say yes, check the first two lines it shows: your card's title with the new number, then the version line. If they show an older number or none, attach your newest card and ask again for the title and version line word for word.

  3. Then swap the old skill for the new one, so only one copy can run.

    Before you save the new skill, delete the old one in Plugins, then Skills. Then save the new one the way you saved your first.

    Before you save the new skill, delete the old one in Customize, then Skills. Then save the new one the way you saved your first.

    With Skills, delete the old skill in Customize, then Skills, before you save the new one the way you saved your first. Without Skills, replace the old skill file in your folder with the new one, then in MyAgent's sources remove the old file and select Upload files to add the new one.

    Replace the old skill file in your folder with the new one. In My Agent's References, open the old file's three-dot menu and select Remove, then add the new file the way you added the first.

Step

Ask your agent which version it's using

  1. Start a new chat where you use your skill, such as My Agent, so the answer comes from the skill rather than this conversation. Pick the skill as in step 1 and send this prompt with its name in the brackets. In a notebook there's nothing to pick. If you attach your skill file to chats instead, attach it here too.

    Which version is my skill?
    Which version of my [your skill's name] skill are you using?
    
    Read the skill itself: the one in my skills, or the skill file with that name in this Project or Notebook or attached to this chat. Give the version number and date from the line under its title, then quote the newest line of its VERSION HISTORY. If you can't find the skill, or it has no version line, say so. Use the skill rather than an earlier conversation. Do not guess, run the workflow or change anything.
  2. It should give the number in your newest card's filename and quote that version's history line. If it names an older version or none, the old skill may still be there, or the new one came from an older file. Fix it as in step 3 and ask again in another new chat.

Step

Change the card first, every time

Your workflow will change as you use it. Change the card first, then make the skill from it, and never edit only the skill: two copies of one rule eventually disagree, and a change made only in the skill disappears the next time you make it from your card. If your tool offers to improve the skill, put the improvement in your card instead.

  1. In a new chat, attach your newest card and send this prompt with the change in the brackets. Check and save the new version as in step 2, keeping every earlier file.

    Make the next version of my Workflow Card
    Update my Reusable Workflow Card, attached, with this change:
    
    [the change, in your own words, such as a step to add or a line of the Standard to tighten]
    
    Follow the card's WORKFLOW VERSIONS section to give me the complete next version. Make it from the attached file, not from a skill or an earlier chat. If the card has no WORKFLOW VERSIONS section, tell me and stop.
  2. If you have a skill or skill file, make it again from the new file as in step 3, then ask which version it's using in a new chat as in step 4.

Save the three prompts you'll reuse, the next version, making your skill again and which version, in My Agent Files beside your card. Edit them to fit how you work, such as typing in your skill's name. Number each new card you turn into a skill the same way.

Keep Your Workflow Card and Skill in Step

Confirm your result

Confirm the outcomes below to finish this guide.

Final checks

Your Workflow Card has a version number, the same in its title, version line and filename, and a version history.

Your skill was made from that version, the old one is gone, and your agent names that version in a new chat.

Provide Feedback

Thanks. That went straight to the people who write these guides.

Next in Week 4

Make Someone Else’s Skill Your Own

Continue in the suggested order, or choose another guide for your task.

View Week 4 guides