Agent Workshop

Agent Workshop - Add Your Workflow Card to Your Agent Inside Copilot

Week 4Agent Workshop

  • 15–25 minGuided walkthrough

Use a desktop browser for this workshop. Add your Reusable Workflow Card to My Agent, your Microsoft 365 Copilot Chat Notebook, tell your agent how to use it and give it a version number, so My Agent runs your workflow whenever you ask for it by name. Then learn how to make someone else's skill your own.

Watch the video walkthrough in StormWind Campus (sign in with your bootcamp login).

What You Need for This Guide

  • A desktop browser.
  • Your approved Microsoft 365 Copilot Chat account with Notebook and file-upload access.
  • Your My Agent Notebook from last week's workshop, with your , Communication Style Guide and Safety & Security Rules in it.
  • Your saved Reusable Workflow Card from this week's session.

Connect Your Agent to Your Information Inside Copilot

Build Your Reusable Workflow Card

Choose the tool you’re allowed to use

Your approved tool

The tool your company approved.

Pick your approved tool above to see the steps and screenshots for it.

Start guide
5 steps · At your own pace
About saved progress

No account needed. Checkmarks save on this browser and device when browser storage is available. If storage is blocked or full, new checkmarks last until you reload or close this page. Progress doesn’t sync to other browsers or devices. Clearing this site’s browser data removes it, and private browsing may not keep it after you close the window.

Step

Add your Workflow Card to My Agent

The Workflow Card you built with this week's session guide, Build Your Reusable Workflow Card, tells your agent how you do one piece of recurring work. Saved in My Agent beside your other three files, it's there in every chat, so you stop attaching it.

Copilot Cowork, a separate tool your organization pays for, can run skills, but most learners don't have it, and whether you have it is your IT team's call. This workshop uses My Agent. Without Notebooks, keep attaching your card and your other three files to each chat, skip step 2, and run steps 3 and 4 in a regular chat. If your account doesn't offer uploads either, ask IT about access.

  1. In My Agent Files, make a folder called Workflows beside your other folders and move your Workflow Card into it.

  2. In Copilot Chat, open Notebooks, then My Agent. In the Content pane, select Add references, then the upload-arrow control, choose your card, and select Open, then Add. References should then list four files, your card among them. Later cards go in the same way.

Step

Tell My Agent how to use Workflow Cards

My Agent can now read your card, but its instructions name only your other three files. This card is last week's instructions plus one line for Workflow Cards, and that line covers every card you add.

  1. At the upper right of My Agent, open the three-dot menu and choose Instructions. In Tell Copilot how to respond, select all of last week's text, paste the card in its place, then select Save. If you've added any lines since last week, including one from another guide, add them to the new card before you save.

    Notebook instructions with your Workflow Cards
    You are my work agent. You help me with my day-to-day work.
    
    You have these reference files. Use each one for its job:
    - Agent Profile: my role, priorities, the people I work with and how I like answers. Use it as background whenever it's relevant.
    - Communication Style Guide: how I write, including any My Voice Dial settings. Use it whenever you draft something I'll send or share. Copy its patterns, not the particulars of its examples. If one of its sections has its own instructions, follow them.
    - Safety & Security Rules: how you must handle information, uncertainty, verification and human review. Follow them in every chat.
    - Workflow Cards: how I do one kind of recurring work, step by step. When my request matches a card's Trigger, or I name a card, follow that card.
    
    How to work with me:
    - Don't invent facts about me, my organization or my work. If a missing detail would change your answer, ask me one question first.
    - Run a file's First Setup Check only when I ask for it.
    - My files are the master copies. When I ask to update one, follow that file's own VERSIONS section if it has one and give me the complete next version. Remind me to save it as my master file, keep the old file, and replace that file in this Notebook. Don't tell me the saved setup has been updated.

Step

Give your Workflow Card a version number

You'll change this card more than any other file, as your work shifts or a new model handles it differently. Number it now, so each change is a new file and you can go back to the last one that worked.

  1. Select New chat in My Agent and send Set up versioning for your Workflow Card in My Agent, with your workflow's name in its first line. On the Change to make line, type one change you have ready, or None, set up versioning only. If the reply says it can't see your card, select +, then Upload images and files, attach the card and send again.

    Set up versioning for your Workflow Card in My Agent
    I want to set up versioning for my [your workflow's name] Workflow Card, so I can track every change.
    
    Change to make: [type one change, such as a step you've tightened since Tuesday, or write "None, set up versioning only"]
    
    Put any change in my card, not your built-in memory, so my file stays my master copy. Unless something conflicts, do all of this in one reply:
    
    1. If I gave a change, put it in the part of the card it fits best, such as Steps, Standard or Output. Use my words, and don't add steps or rules I didn't give you. If it would weaken or contradict something already in the card, stop before writing anything: quote both and ask me which one to keep.
    2. If my card has no WORKFLOW VERSIONS section, add the one below to the end of the card, word for word. If the card has no version number in its title, version line or filename, treat the current card as Version 1. Otherwise continue from its current number. Do not restart numbering.
    3. Follow WORKFLOW VERSIONS to return the entire updated card, with the new version number in its title, its version line and its filename. Keep every other part of the card word for word, including Rule Priority and How I Want My AI Agent to Use This Workflow.
    4. In the What changed table, list my change, if I gave one, and say whether you added WORKFLOW VERSIONS. Do not claim a section was added if it was already there.
    5. End by walking me through saving it, as WORKFLOW VERSIONS describes.
    
    WORKFLOW VERSIONS
    
    The card title, the version line under it, and the filename all show the same version number. Use simple whole numbers: v1, v2, v3, and so on. The title is my workflow's name followed by Workflow Card and the number, with readable spaces, like Weekly Status Update Workflow Card v2. The filename starts Workflow-Card, then the workflow's name in a few words joined by hyphens, then the number, like Workflow-Card-Weekly-Status-Update-v2.txt. Keep the same name in every version.
    
    - If I ask which version you're using, give that line's number and date.
    - If I ask you to update this card, create the next version:
      1. Raise the current version number by one. Use that new number in the title and in the version line below it, like Version 2 | Updated October 27, 2026. These are examples: use the actual next number and today's date. If you can't see today's date, write DATE NEEDED.
      2. Apart from the title, version line and version history, change only what I asked. Keep every other part of the card word for word, in the same order.
      3. Add a one-line summary to the top of VERSION HISTORY. Keep the five newest lines.
      4. Give me the entire updated card as one downloadable plain-text file named as above, like Workflow-Card-Weekly-Status-Update-vNUMBER.txt, replacing NUMBER with the new version number. Use only plain letters, digits, hyphens and the dot before txt. Include every section and all unchanged content. If you can't create files, put the entire card in one code block and give me the exact filename above it.
      5. Show what changed in a table: Section, What changed, Why.
      6. Walk me through saving it: save the new file in the same folder as my earlier versions, keeping every older file. Then replace the card in your saved setup the same way I first added it, start a new chat, and ask which version you're using.
    - If a change would contradict something already in this card, quote both and ask me which one to keep before you write the new version.
    - If I tell you something new that belongs in this workflow, offer a new version. Wait for my yes.
    - Never overwrite an earlier version or reuse its number.
    - You can't change your own saved setup, so don't say my card is updated until I've replaced the file.
    
    VERSION HISTORY
    - Version 1: Original card.
  2. Check the reply before you save. What changed should list any change you gave and say whether WORKFLOW VERSIONS was added. The title, version line and filename should show the same number, v2 if your card had none, as in Workflow-Card-Weekly-Project-Status-Update-v2.txt, with the rest of the card word for word. If something's wrong, ask in the same chat for a complete corrected file.

  3. Save the new file from the reply's download link into your Workflows folder, beside the earlier card, and keep both. If Copilot gives you the card in a code block instead, copy all of it into a new plain-text file with the exact filename above it. Then, in References, open the earlier card's three-dot menu and select Remove, and add the new file with Add references, as in step 1. Without a Notebook, attach the new file instead of the earlier one from now on.

Step

Run your workflow by name

Now use your card the way you will every week. Select New chat in My Agent and ask for your workflow by name, such as “Run my weekly project status update workflow.” Your agent should follow the card and ask for what this run needs, such as this week's notes.

  1. Give it what it asks for, prepared the way the data rules and your Safety & Security Rules say. A short made-up example works too. Check the result against your card's Standard, as you did in this week's session. If it falls short, say so in the same chat. If the card itself needs the fix, that's the change for its next version, made as in step 3.

  2. To confirm My Agent is using the new card, select New chat again and, with nothing attached, send Check my file versions, with my Workflow Card. It should name your new card version beside your other three files. If it names the earlier card, check References and try another new chat. Without a Notebook, send it in a chat with your four files attached.

    Check my file versions, with my Workflow Card
    Which versions of my files are you using?
    
    Read the current Safety & Security Rules, Agent Profile, Communication Style Guide and Workflow Card saved in this Project or Notebook, or attached to this chat. For each one, give its version number and updated date. If a number or date is missing, say so. Then quote the newest line of my Workflow Card's VERSION HISTORY. Use the files rather than an older conversation. Do not guess or change any file.

Step

Make someone else's skill your own

Deciding what your agent should do next is hard, and one shortcut is to borrow. Colleagues, your company and websites share workflows and skills (a skill is saved instructions for one job, much like your card). Someone else's rarely fits your work as it comes, so you'll tailor it.

Make Someone Else’s Skill Your Own takes you through it: keep the original as it came, read it before you install it, have your agent fit it to your work, save your version as your own, and test it on a new example. In Copilot Chat, your version becomes a file in My Agent's References, like your card.

Agent Workshop - Add Your Workflow Card to Your Agent Inside Copilot

Confirm your result

Confirm the outcomes below to finish this guide.

Final checks

A new chat in My Agent (or a chat with your four files attached) names the current version of your Workflow Card (the one the versioning card gave you) beside your Agent Profile, style guide and Safety & Security Rules.

Asked for your workflow by name, My Agent follows your card and asks for what that run needs.

Provide Feedback

Thanks. That went straight to the people who write these guides.